-
Product Description
A Houseworks innovation has fine-tuned the concept of battery-operated dollhouse lighting! This well-designed, high-quality brass/metal fixture has a smaller battery case that unscrews to access a smaller battery. Everything has been made even easier because the base is magnetized! To install, glue the tiny metal backplate where you want the fixture, and the magnet on the light will keep it in place. The magnets are strong enough to hold but light enough to remove to operate the on/off switch or change the battery. No more fumbling with a permanently installed tiny fixture! The included 3V lithium battery is replaceable and will last approximately 50 hours. The white LED is not replaceable but will burn for about 4,000 hours and put out much less heat than traditional bulbs.
Note: Our current stock has a white wire instead of black. The wire can be painted with craft paint or colored with a permanent marker if desired.
The Alford Black Coach Hanging Lamp features an ornate filigree details and no panes.
3/4"W x 3-1/2"H x 3/4"D
Battery operated lights, especially those that use a magnetic mount, can be heavy, and are therefore best attached to a wall or ceiling in a permanent or semi-permanent manner. A solvent-based glue or an epoxy will create a permanent attachment. Drilling a hole in the magnet and screwing the magnet to the wall or ceiling will create a semi-permanent attachment. It is semi-permanent in that the screw and magnet can be removed leaving behind only a small hole. -
Product Specifications
Legacy Item #: 2315 Product Weight (oz.): 1.02 BRAND: HOUSEWORKS COLOR: BLACK FINISH: GLOSS MATERIAL: METAL MINIATURES SCALE: 1/12 SCALE Product Diameter (in.): 3/4" Product Height (in.): 3-1/2"
Note: Our current stock has a white wire instead of black. The wire can be painted with craft paint or colored with a permanent marker if desired.
The Alford Black Coach Hanging Lamp features an ornate filigree details and no panes.
3/4"W x 3-1/2"H x 3/4"D
Battery operated lights, especially those that use a magnetic mount, can be heavy, and are therefore best attached to a wall or ceiling in a permanent or semi-permanent manner. A solvent-based glue or an epoxy will create a permanent attachment. Drilling a hole in the magnet and screwing the magnet to the wall or ceiling will create a semi-permanent attachment. It is semi-permanent in that the screw and magnet can be removed leaving behind only a small hole.
Legacy Item #: | 2315 |
Product Weight (oz.): | 1.02 |
BRAND: | HOUSEWORKS |
COLOR: | BLACK |
FINISH: | GLOSS |
MATERIAL: | METAL |
MINIATURES SCALE: | 1/12 SCALE |
Product Diameter (in.): | 3/4" |
Product Height (in.): | 3-1/2" |