-
Product Description
A Houseworks innovation has fine-tuned the concept of battery-operated dollhouse lighting! This well designed, high-quality brass/metal fixture has a smaller battery case which unscrews to access a smaller battery. Everything has been made even easier because the base is magnetized! To install this double wall sconce light, just glue the tiny metal backplate where you want the fixture and the magnet on the light will keep it in place. The magnets are strong enough to hold but light enough to remove to operate the on/off switch or change the battery. No more fumbling with a permanently installed tiny fixture! The included 3V lithium battery is replaceable and will last approximately 50 hours. The LED is not replaceable but will burn for about 4,000 hours and put out much less heat than traditional bulbs.
The Chorley Double Sconce is brass with textured white plastic shades with gold trim.
1-5/8"W x 1-1/4"H x 1-1/4"D (projection from wall)
Battery operated lights, especially those that use a magnetic mount, can be heavy, and are therefore best attached to a wall or ceiling in a permanent or semi-permanent manner. A solvent-based glue or an epoxy will create a permanent attachment. Drilling a hole in the magnet and screwing the magnet to the wall or ceiling will create a semi-permanent attachment. It is semi-permanent in that the screw and magnet can be removed leaving behind only a small hole. -
Product Specifications
Legacy Item #: 12335 Product Weight (oz.): 1.09 BRAND: HOUSEWORKS COLOR: BRASS FINISH: GLOSS MATERIAL: METAL MINIATURES SCALE: 1/12 SCALE Product Height (in.): 1-1/4" Product Width (in.): 1-5/8"
The Chorley Double Sconce is brass with textured white plastic shades with gold trim.
1-5/8"W x 1-1/4"H x 1-1/4"D (projection from wall)
Battery operated lights, especially those that use a magnetic mount, can be heavy, and are therefore best attached to a wall or ceiling in a permanent or semi-permanent manner. A solvent-based glue or an epoxy will create a permanent attachment. Drilling a hole in the magnet and screwing the magnet to the wall or ceiling will create a semi-permanent attachment. It is semi-permanent in that the screw and magnet can be removed leaving behind only a small hole.
Legacy Item #: | 12335 |
Product Weight (oz.): | 1.09 |
BRAND: | HOUSEWORKS |
COLOR: | BRASS |
FINISH: | GLOSS |
MATERIAL: | METAL |
MINIATURES SCALE: | 1/12 SCALE |
Product Height (in.): | 1-1/4" |
Product Width (in.): | 1-5/8" |