-
Product Description
This textured plastic sheet can be painted with acrylic paint and trimmed to size with scissors or a utility knife.
Apply with Stick'M Adhesive or Weldbond.
Ribs run parallel to the long dimension, 23-1/2". Approximately 1/8" between ribbing.
23-1/2"W x 7"H x 1/8"D
Installation Tip: A white craft glue is sufficient to mount the Five Small Corrugated Metal Sheets to a roof made of MDF. This is because the glue only needs to hold the materials in place, as compared to it being structural or weight bearing. Contact surfaces are reduced by the corrugated ridges and grooves, therefore be sure to spread glue over the entirety of every contact surface.
Remember to orient the corrugated ridges and grooves to run off the roof for good drainage rather than running along the roof and to overlap the sheets by at least one pattern repeat. -
Product Specifications
Legacy Item #: 9754 Product Weight (oz.): 0.1 COLOR: WHITE FINISH: MATTE MATERIAL: PLASTIC MINIATURES SCALE: 1/12 SCALE Product Width (in.): 23-1/2" Product Height (in.): 7"
This textured plastic sheet can be painted with acrylic paint and trimmed to size with scissors or a utility knife.
Apply with Stick'M Adhesive or Weldbond.
Ribs run parallel to the long dimension, 23-1/2". Approximately 1/8" between ribbing.
23-1/2"W x 7"H x 1/8"D
Installation Tip: A white craft glue is sufficient to mount the Five Small Corrugated Metal Sheets to a roof made of MDF. This is because the glue only needs to hold the materials in place, as compared to it being structural or weight bearing. Contact surfaces are reduced by the corrugated ridges and grooves, therefore be sure to spread glue over the entirety of every contact surface.
Remember to orient the corrugated ridges and grooves to run off the roof for good drainage rather than running along the roof and to overlap the sheets by at least one pattern repeat.
Apply with Stick'M Adhesive or Weldbond.
Ribs run parallel to the long dimension, 23-1/2". Approximately 1/8" between ribbing.
23-1/2"W x 7"H x 1/8"D
Installation Tip: A white craft glue is sufficient to mount the Five Small Corrugated Metal Sheets to a roof made of MDF. This is because the glue only needs to hold the materials in place, as compared to it being structural or weight bearing. Contact surfaces are reduced by the corrugated ridges and grooves, therefore be sure to spread glue over the entirety of every contact surface.
Remember to orient the corrugated ridges and grooves to run off the roof for good drainage rather than running along the roof and to overlap the sheets by at least one pattern repeat.
| Legacy Item #: | 9754 |
| Product Weight (oz.): | 0.1 |
| COLOR: | WHITE |
| FINISH: | MATTE |
| MATERIAL: | PLASTIC |
| MINIATURES SCALE: | 1/12 SCALE |
| Product Width (in.): | 23-1/2" |
| Product Height (in.): | 7" |
